Behringer NX4-6000 Lightweight 4-Channel 6000W Class-D Power Amplifier NX46000 653341314932

Regular price $ 498.99

Lightweight and sturdy, the 2 RU rack-mountable Behringer NX4-6000 is a stereo power amplifier capable of delivering 440W of peak power per channel at 8 Ohms, or in bridge mode, up to 1600W of peak power into two 8-Ohm speakers. It employs SmartSense loudspeaker impedance compensation technology combined with a switch-mode power supply and zero-attack limiters to provide a linear 20 Hz to 20 kHz frequency response with noise-free audio and fast transient response at maximum output power into any speaker load impedance.

The NX4-6000 features cool-running, high-density Class-D technology with near-zero thermal buildup, and an independent DC, LF, and thermal overload protection on each channel, which together protect the amplifier from shutting down and interrupting your show. A variable-speed fan and ventilation openings with back-to-front air flow further prevent overheating.

Simple to operate, the NX4-6000's front panel is equipped with detented and illuminated gain control knobs for precise level setting. The back panel houses four XLR-1/4" combination input connectors compatible with balanced and unbalanced line-level sources. Twist-lock speaker connectors inhibit accidental speaker disconnection at the amp.

Key Features

Delivers a maximum of 4 x 1600W at 2 Ohms, 4 x 860W at 4 Ohms, or 4 x 440W at 8 Ohms in stereo mode
Delivers a maximum of 2 x 3000W at 4 Ohms or 1600W at 8 Ohms in bridge mode
Weighs only 13.4 lb
Cool-running, high-density Class-D technology with near-zero thermal buildup
Efficient switch-mode power supply for noise-free audio, fast transient response, and low power consumption
SmartSense loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
Zero-attack limiters offer maximum output level with reliable overload protection
Built-in stereo crossover with low-cut, high-cut, and full-range mode
Detented and illuminated gain controls for precise level setting
Precise 4-segment Signal and Limit LEDs to monitor performance
XLR and 1/4" TRS combination input connectors for compatibility with balanced and unbalanced audio sources
Twist-lock speaker connectors for reliable connection
Independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without interruption
Back-to-front ventilation system prevents thermal buildup for reliable operation


Behringer NX4-6000 Specs

Maximum Output Power 4 x 1600 W into 2 Ohms per channel, stereo
4 x 860 W into 4 Ohms per channel, stereo
4 x 440 W into 8 Ohms per channel, stereo
2 x 3000 W into 4 Ohms, bridged
2 x 1600 W into 8 Ohms, bridged
Amplifier Class Class-D
Input Sensitivity 0.775 V (0 dBu), for rated power into 4 Ohms
Distortion <0.2%
Frequency Response 20 Hz to 20 kHz, +0 / -2 dB
Damping Factor >145 at 8 Ohms
Signal to Noise >100 dB
Input Connections 4 x XLR-1/4" combo jacks
Input Impedance 10 kOhms, unbalanced
20 kOhms, balanced
Output Connectors 4 x locking-style speaker connectors
Controls Front Panel Channel A, B, C, and D gain knobs
Power switch
Controls Rear Panel 2 x mode switches (bridge, stereo, mono)
2 x crossover switches (LF, full range, HF)
Circuit breaker
Indicators Power: Amber LED
Limit: 0 dB LED (per channel)
Signal: -40, -6, -3 dB LEDs (per channel)
Protect: Red LED (per channel)
Cooling Continuously variable speed fan
Back-to-front air flow
Amplifier Protection Thermal and DC protection
Stable into reactive or mismatched loads
Overload Protection On/off muting, DC-fault power supply shutdown
Power Supply 120 VAC, 60 Hz
Fuse T 25 A H, 250 V
Power Consumption 620 W, at 2 Ohms, 1/8 rated power
Power Connector Standard IEC receptacle
Dimensions (W x H x D) 19.0 x 3.7 x 12.4" / 48.3 x 9.4 x 31.6 cm (including 0.19" / 5 mm rubber feet)
Weight 13.4 lb / 6.1 kg


Packaging Info

Package Weight 16.15 lb
Box Dimensions (LxWxH) 15.3 x 10.0 x 6.5"