Behringer XENYX 1202FX 12-Channel Audio Mixer with Multi-effects Processor

Regular price $ 99.99

The Behringer XENYX 1202FX is a mixer that offers clear and natural sound in a small and portable format. With twelve inputs, four high-quality XENYX mic preamps, a 60mm logarithmic-taper master fader, and a multi-FX processor, this versatile mixer is ideal for a wide variety of mix and recording applications, from small-stage gigs to home-studios, mid-size corporate events, and more.


The XENYX 1202FX is quick to set up and operate with all connections and controls easily reachable on the top of the unit. The first four input channels feature XENYX mic preamps on four XLR connectors, as well as four 1/4" inputs for line-level signals. Switchable, onboard 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones. A gain knob lets you adjust the input level and a clip LED alerts you if you are overdriving the input. British-style 3-band EQs provide warm and musical tone corrections for your vocals and instruments.

The four sets of stereo inputs each feature +4/-10 switches used to match the mixer's input sensitivity to the incoming signal. This helps avoid signal degradation when connecting stereo keyboards or playback devices to the mixer. Pan (or balance) and level controls are included for all channels.

The built-in, dual-engine multi-FX processor offers 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and a variety of multi-effects. Each channel is equipped with a post-fader FX send, which you can use to send signal to the FX processor or to an external processor. The FX-to-Main knob allows you to control the level of the effect in your main mix.

The CD/tape section provides an easy way to connect an external 2-track recorder and/or playback device. The CD/tape inputs are assignable to either the main mix or to the control room/phones outputs. The main mix fader controls the signal at both the main outs and CD/tape output, while a dedicated knob adjusts the volume for the phone/control room outputs.

Key Features
Compact and versatile 12-channel analog mixer for small-stage gigs or mid-size corporate events
Four, quality XENYX microphone preamps with 130 dB of dynamic range
Switchable 48V phantom power
Four, balanced mono line inputs
Four, unbalanced stereo pairs of line inputs
24-bit, dual-engine multi-FX processor with 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and more
Neo-classic, British-style 3-band EQs for warm and musical sound
One, mono, post-fader FX-send knob per channel for internal FX processor and/or as send to external processor
Main mix outputs and separate control room, phones, and stereo CD/tape outputs
CD/tape inputs assignable to main mix or control room/phones outputs
Mic channels with low-noise and distortion-free circuitry for natural sound reproduction
Long-wearing 60mm logarithmic-taper master fader and sealed rotary controls


Behringer 1202FX Specs

Microphone Inputs 4 x XLR, electronically balanced, discrete input circuit

XENYX microphone preamps with 48 V phantom power (switchable)
Microphone EIN (EIN 20 Hz to 20 kHz)

At 0 Ohm Source Resistance: -132.7 dB / 137 dB A-weighted
At 50 Ohms Source Resistance: -130 dB / 133.9 dB A-weighted
At 150 Ohms Source Resistance: -127.1 dB / 130.9 dB A-weighted

Frequency Response: <10 Hz to 200 kHz (-1 dB)

Gain Range: +10 to +60 dB

Maximum Input Level: +12 dBu at +10 dB gain

Impedance: 2.6 kOhms, approximately

Signal-to-Noise Ratio: -107 dB / -111 dB A-weighted (0 dBu In at +22 dB gain)

Distortion (THD+N): 0.005% / 0.003% A-weighted
Line Inputs 4 x 1/4" / 6.3 mm TRS, electronically balanced

Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately)

Gain Range: -10 to +40 dB

Maximum Input Level: +20 dBu at 0 dB gain
Fade-Out/Crosstalk Attenuation Main Fader Closed: 85 dB

Channel Fader Closed: 88 dB
Frequency Response Microphone Input to Main Out:
<10 Hz to 80 kHz (+0 db/-1 dB)
<10 Hz to 137 kHz (+0 db/-3 dB)
Stereo Line Inputs 4 x pairs of 1/4" / 6.3 mm TRS, electronically balanced

Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately, +4 dBu operating level)

Maximum Input Level: +22 dBu
Equalization (EQ mono channels)

Low: 80 Hz (±15 dB)
Mid: 2.5 kHz (±15 dB)
High: 12 kHz (±15 dB)
FX Send 1 x 1/4" / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu
Main Outputs 2 x 1/4" / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu
Control Room Outputs 2 x 1/4" / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu
Headphone Output 1 x 1/4" / 6.3 mm TRS, stereo, unbalanced

Impedance: 150 Ohms (+25 dBm)

Maximum Output Level: +19 dBu
Tape I/O 1 x pair RCA, stereo, unbalanced CD/tape inputs

1 x pair RCA, stereo, unbalanced tape outputs
Noise Main Mix at -∞, Channel Fader at -∞: -105 dB / -108 dB A-weighted

Main Mix at 0 dB, Channel Fader at -∞: -94 dB / -97 dB A-weighted

Main Mix at 0 dB, Channel Fader at 0 dB: -83 dB / -85 dB A-weighted
FX Section Converter: 24-bit Sigma-Delta

Sampling Rate: 40 kHz
AC Adapter Input: 120 V, 60 Hz

Output: 2 x 14.8 V, 2 x 500 mA
Dimensions (H x W x D) 1.9 x 8.7 x 9.5" / 47 x 220 x 242 mm
Weight 4.6 lb / 2.1 kg (approximately)

Packaging Info

Package Weight 6.1 lb
Box Dimensions (LxWxH) 14.4 x 12.1 x 5.1"